These (unpainted) walls will replace the "blank" rear wall of our HO4152 Building 'D' Kit ... 7.5"L x 5.5"H.
They can also be used left or right of any of our structure kits to lengthen the structure ... see photos below!
Additional 1.5" Side Walls are also available to increase an original kit's width or to add length.
These two separate walls can be re-arranged left or right of each other. Total wall length of 7.5" is comprised of one 3" wide wall and a second 4.5" wide wall.
These wall heights match our HO4150 Allstate Factory & HO4152 Building D kits at 5.5" High
(NOTE: 1/8th" wide Dovetail Tabs can be easily removed with a razor saw for use in kitbashing with our's or other manufacturer's product.)
Weathered, laser etched brick & stone in MDF wood... additional "carving" is easily accomplished with an Xacto blade (please use eye protection!).
Laser etched brick Cornice & Pilaster trim in micro plywood layers...4 layers of Cornice are provided.
Windows and Doors are finely laser cut into micro plywood.
Assembly tips - the wall components are assembled per our standard process. With the wall panels flat on your work surface, windows & doors press fit flush to the rear surface, then sills follow.
Cornice & Pilasters layer onto the wall surfaces ... you may choose to layer the Cornice in place first, then trim the Pilasters to fit below, or begin with the Pilasters and trim the Layer 1 Cornice to fit between them. The choice is yours!
Extra Cornice length is provided to allow for you to mitre-join to the next wall surface.
The Loading Dock opening accepts our HO4159 Loading Dock Interior Kit (available separately).